Why choose
PaintChecker
Why choose PaintChecker
01
See The Problem Before It Becomes Expensive
Traditional film-thickness gauges are typically used after the coating has cured. They are valuable for confirming the final result — but by then, the powder has already been applied, the part has passed through the oven, energy and labour have already been used, and rework may already be necessary.
PaintChecker gives you useful thickness information before curing. By measuring soft powder without contact and predicting the final dry film thickness, your team has the opportunity to identify variation earlier and adjust the process before the result becomes fixed.
Traditional gauges confirm what happened. PaintChecker helps you control what happens next.
PaintChecker is designed to complement final quality inspection where required, while giving your team something traditional post-cure measurement cannot: earlier process visibility.
02
The Cost Of Waiting Is Bigger Than One Bad Part
Continuing with delayed feedback means coating problems can remain unnoticed while production keeps moving.
Too much powder may continue to be applied. Coating variation may repeat across multiple parts. More parts may pass through the oven before the problem is identified. Rework, repainting, rejected parts, energy use, and labour costs can continue to accumulate.
The real risk is not simply one defective component.
It is allowing the same incorrect process condition to continue across multiple parts or batches because nobody can see the problem early enough.
PaintChecker shortens the feedback loop between coating application and quality control, giving your team earlier information to make faster, better process decisions.
Detect earlier. Correct sooner. Reduce avoidable cost.
03
Comparison with other methods
Continuing with delayed feedback means coating problems can remain unnoticed while production keeps moving.
Too much powder may continue to be applied. Coating variation may repeat across multiple parts. More parts may pass through the oven before the problem is identified. Rework, repainting, rejected parts, energy use, and labour costs can continue to accumulate.
The real risk is not simply one defective component.
It is allowing the same incorrect process condition to continue across multiple parts or batches because nobody can see the problem early enough.
PaintChecker shortens the feedback loop between coating application and quality control, giving your team earlier information to make faster, better process decisions.
Detect earlier. Correct sooner. Reduce avoidable cost.
