Turn Coating Thickness Into Process Data
Move from inspection to process control.
In many coating operations, film thickness is still treated mainly as a quality-inspection result.
A part is coated.
Then cured.
Then measured.
The thickness value confirms what happened.
But by that point, the process has already moved on.
For automated production, there is a bigger opportunity:
Measure coating thickness during the process and turn that information into production data.
That is where PaintChecker Industrial becomes different from a conventional manual measurement approach.
Measure Automatically During Production
PaintChecker Industrial is designed for automated and inline coating-thickness measurement.
Instead of an operator manually checking individual parts, the measurement can become part of the production process itself.
Depending on the application and system design, PaintChecker Industrial can be integrated into an automated line to measure coating thickness repeatedly as parts move through production.
This creates a continuous stream of coating-thickness information.
The result is not simply:
“This part measured 82 µm.”
It becomes:
“This is how the coating process is performing right now.”
Send Thickness Data Directly to the PLC
Measurement data becomes much more useful when it is connected to the production system.
PaintChecker Industrial supports integration with industrial control systems, allowing coating-thickness data to be transmitted to a PLC or higher-level production system.
This makes it possible to combine thickness data with other process information such as:
Product ID
Coating recipe
Spray parameters
Production time
Part type
Line position
Robot program
Batch or order information
Now coating thickness is no longer an isolated inspection result.
It becomes part of the production data.
Detect Process Drift Earlier
An automated coating process may appear stable while the actual coating thickness begins to change.
Possible causes include:
Spray-gun condition
Powder output
Gun distance
Robot path
Conveyor speed
Powder characteristics
Temperature or humidity
Product geometry
Equipment condition
With inline measurement, thickness data can be monitored continuously or at defined points in the process.
If the measured value moves outside the expected range, the system can identify the deviation earlier.
This can support:
Tolerance warnings
Operator notifications
Process alarms
Trend monitoring
Faster investigation
Earlier corrective action
The goal is not simply to find one bad part.
It is to detect when the process itself is starting to move.
Reduce Dependence on Manual Inspection
Manual measurement will always have value.
But in high-volume or automated production, relying only on manual inspection creates limitations.
An operator has to:
Select the part
Stop or access the process
Position the gauge
Take the measurement
Record the result
Decide whether action is required
This takes time.
And only a limited number of parts can realistically be checked.
Automated measurement can provide more frequent and more consistent process information without requiring the same level of manual intervention.
This can be especially valuable where:
Production volumes are high
Skilled labor is limited
Measurements need to be repeated frequently
Process documentation is important
Coating consistency must be monitored over time
From Tolerance Monitoring to Process Optimization
Automated thickness measurement can begin with a simple objective:
Is the coating within the target range?
For example:
Target thickness: 80 µmTolerance: ±10 µm
If the measured thickness is outside the acceptable range, the system can generate a warning.
That alone can create useful process visibility.
But once thickness data is available continuously, the next question becomes more interesting:
Can we use this information to improve the coating process?
Thickness trends can potentially help engineers evaluate relationships between coating results and process settings.
For example:
Powder output
Gun voltage
Gun current
Spray distance
Robot speed
Conveyor speed
Number of passes
Coating recipe
This creates a path from measurement toward process optimization.
A Practical Automation Path
Full closed-loop control does not need to be the first step.
A more practical approach is to build the system gradually.
Step 1: Automated Thickness Monitoring
PaintChecker measures automatically during production.
The measurement data is sent to the PLC or production system.
The operator can see whether the coating is within the expected range.
Step 2: Tolerance Warnings
If thickness moves outside the target window, the system can generate a warning or alarm.
This helps operators react sooner.
Step 3: Process Recommendations
Thickness data can be compared with production settings to help determine which parameters may need adjustment.
For example, the system may recommend changing to a different coating recipe or adjusting powder output.
From One Measurement to a Process Trend
A single thickness value tells you what happened at one point.
Hundreds or thousands of measurements can tell you how the process behaves over time.
Automated measurement can make it possible to analyze:
Thickness trends by shift
Variation by product
Variation by coating recipe
Changes after maintenance
Differences between powder batches
Performance after gun adjustment
Long-term process stability
This creates a much deeper understanding of the coating process.
Instead of asking:
“Was this part acceptable?”
you can begin asking:
“Is the process becoming more stable?”
Support Better Traceability
For industries where process documentation is important, automated thickness measurement can also support traceability.
Measurement data can potentially be associated with:
Part numbers
Production orders
Batch numbers
Date and time
Coating recipes
Measurement positions
Production lines
This can help quality and production teams investigate problems more quickly and build a stronger history of the coating process.
Less Inspection. More Process Information.
The objective of PaintChecker Industrial is not simply to automate a manual measurement task.
The bigger opportunity is to make coating thickness part of the production-control system.
Instead of:
Coat → Cure → Inspect
the process can move toward:
Coat → Measure → Monitor → Adjust → Cure
That changes coating thickness from a final quality result into an active production variable.
Start With the Right Level of Automation
Not every customer needs fully automated closed-loop control.
The right first step may simply be:
Automatic thickness measurement
PLC data transmission
Tolerance monitoring
Operator warning
Process trend analysis
Once that information proves useful, more advanced integration can be evaluated.
The best approach is to begin with the production problem.
Ask:
What decision would become easier if coating thickness were available automatically in real time?
Then build the automation around that need.
Turn coating thickness into process data.
Monitor automatically.React earlier.Reduce manual inspection.Build a more stable coating process.


Comments